No other event in the world brings together the automotive and steel industries in one place like Great Designs in Steel. The event offers automakers and suppliers first hand insight into what’s ahead for advanced steel technologies....more
5/16/2012 - Kenneth McLean - General Motors Company
5/16/2012 - Warren Parsons – General Motors Company
5/16/2012 - Shawn Morgans - Ford Motor Company
5/16/2012 - Ronald Moore - Retired, Division Chief with the McKinney (TX) Fire Department
5/16/2012 - David Coakley and John Latimer III - Nissan Technical Center, North America
5/16/2012 - Phil Yaccarino - General Motors Company
5/16/2012 - Thomas Stoughton - General Motors Company
5/16/2012 - J.P. McGuire - Chrysler Group LLC
5/16/2012 - Hong Zhu - ArcelorMittal USA LLC
5/16/2012 - Dean Gericke - Vari-Form
5/16/2012 - Tom Johnson and Brian Oxley - Shape Corporation
5/16/2012 - Michael Shih - United States Steel Corporation
5/16/2012 - Bilal Bazzi - Material Sciences Corporation
5/16/2012 - Lutz Kessler - ThyssenKrupp Steel Europe AG
5/16/2012 - Jody Shaw – United States Steel Corporation
5/16/2012 - George Coates - The Phoenix Group
5/16/2012 - Patrick Anderson - The Timken Company (not available)
5/16/2012 - Colin Bonathan, Michael Levich, and Cherise Caldwell - Lawrence Technological University
5/16/2012 - John Schnatterly - MEGA Associates
5/16/2012 - Harry Singh – EDAG, Inc.
5/16/2012 - David Havrilla - TRUMPF Inc.
5/16/2012 - Chris Dackson - ROFIN-Sinar, Inc.
5/16/2012 - Peter Busuttil - KUKA
5/16/2012 - Stan Ream - EWI
5/16/2012 - Jay Reddick - Estes Design and Manufacturing
5/16/2012 - Thomas Thuelig - BILSTEIN North America, Inc.
5/23/2013 - Based on preliminary Census Bureau data, AISI reported today that the U.S. imported a total of 2,680,000 net tons (NT) of steel in April.
5/22/2013 - AISI applauds House passage of the bill and urges President Obama to approve the Keystone pipeline.
5/17/2013 - Heenan was president of the Steel Recycling Institute and retired in 2010 after nearly 40 years of service in the steel industry.
5/16/2013 - A special section in the May 2013 issue brings together the newest and most relevant original research on the behavior and design of cold-formed steel structures.
5/15/2013 - Sponsored by the International Code Council, the annual campaign promotes what it takes to create and keep safe and sustainable structures.
5/14/2013 - The awards were presented at the MBMA Spring Meeting held May 5-7, 2013 in San Diego, CA.
5/8/2013 - AISI has been reaccredited by ANSI under its recently revised operating procedures for documenting consensus on AISI-sponsored American National Standards.
5/2/2013 - Recent research proves that AHSS body structures can be as lightweight as aluminum bodies, while meeting all crash performance standards.
5/1/2013 - SMDI's Bumper Group releases the 5th edition of the "Steel Bumper Systems for Passenger Vehicles and Light Trucks" product manual.
5/1/2013 - SMDI and WorldAutoSteel unveiled a new tool at GDIS that allows vehicle designers to evaluate material selection tradeoffs such as mass, cost and greenhouse gas emissions.