This event offers automakers and suppliers first hand insight into what’s ahead for advanced steel technologies. Register Today!...more
5/19/2011 - Steel offers solutions for the challenges facing automakers today and far into the future.
5/18/2011 - John McElroy - President of Blue Sky Productions, Host of Autoline Detroit, Autoline Daily and Autoline After Hours
5/18/2011 - An overview of steel body structure designs that reduce mass by more than 35 percent and reduce total life cycle emissions by nearly 70 percent!
5/18/2011 - Steve McCallum and Monte Taylor - General Motors Company
5/18/2011 - Sean McAlinden - Center for Automotive Research (CAR)
5/18/2011 - Shawn Morgans - Ford Motor Company
5/18/2011 - Abey Abraham - Ducker Worldwide
5/18/2011 - Priya Prasad - Alliance of Automobile Manufacturers (Please contact us for a copy of the PowerPoint)
5/18/2011 - Douglas Smith - Chrysler Group LLC
5/18/2011 - DJ Zhou – Chrysler Group LLC
5/18/2011 - Mai Huang - ArcelorMittal USA LLC
5/18/2011 - Guofei Chen – United States Steel Corporation
5/18/2011 - Gang Huang - ArcelorMittal USA LLC
5/18/2011 - Joe Meyecic – Diversified Tooling Group
5/18/2011 - Ravir Bhatnagar – ArcelorMittal USA LLC
5/18/2011 - Darryl Young – Ford Motor Company Xueyuan Nie – University of Windsor
5/18/2011 - Ming Shi – United States Steel Corporation
5/18/2011 - Todd Outman - Rotaguard
5/18/2011 - Danet Suryatama – EDAG Inc.
5/18/2011 - Luiz Lopes - Maxion-Fumagalli Automotive
5/18/2011 - Timo Faath - ThyssenKrupp Steel USA, LLC
5/18/2011 - Jody Hall - General Motors Company
5/18/2011 - Albert Sedlmaier - data M Sheet Metal Solutions GmbH
5/18/2011 - Justin Hunt– AET Integration, Inc.
5/18/2011 - Mansour Mirdamadi – Dow Automotive Systems
5/18/2011 - Susan Wolf – ArcelorMittal USA LLC
5/18/2011 - Kelvin Shih – Lawrence Technological University
1/14/2014 - New steel technologies provide the safety, reliability and performance today’s customers seek.
1/13/2014 - Press conference and steel company exhibits showcasing steel solutions to help automaker meet 54.5 by 2025.
1/13/2014 - New steel technologies provide the safety, reliability and performance today’s customers seek.
1/13/2014 - SMDI's North American International Auto Show Press Kit
12/4/2013 - Advanced steel suspension part helps automakers meet fuel economy standards.
11/27/2013 - Design News article addresses how the steel industry is working to help OEMs build cars that will meet the 54.5 MPG standards with AHSS technologies.
9/25/2013 - A car's entire life cycle must be considered to account for the full environmental impact.
9/25/2013 - SMDI statement regarding the Oak Ridge National Laboratory’s Life Cycle Assessment - Energy and CO2 Emissions of Aluminum-Intensive Vehicles.
9/25/2013 - In response to today’s article, “Aluminum Industry Girds for Auto Battle,” the steel industry would like to clarify several points.