-
5/16/2016 - Behrooz Shahidi – Ford Motor Company
-
5/16/2016 - Hyunok Kim – EWI Forming Center
-
5/16/2016 - Ram Iyer and Paul Schurter – ArcelorMittal
-
5/16/2016 - Markus Zoernack – Mubea
-
5/16/2016 - Daniel Branagan – The NanoSteel Company
-
5/16/2016 - Shawn Crichley, Brad Klein and TJ Palesano – Honda R&D Americas, Inc.
-
5/16/2016 - Eric Petersen – AK Steel Corporation
-
5/16/2016 - Fritz Ebner – Ebner Furnaces, Inc.
-
5/16/2016 - Alissa Kendall – University of California, Davis
-
5/16/2016 - David Van Aken – Missouri University of Science and Technology
-
5/16/2016 - Tom Domlovil, Christopher Hartley and Jeff Tessmer – Nissan North America
-
5/16/2016 - Brandie Sebastian – Steel Recycling Institute
-
5/16/2016 - Roland Geyer – University of California at Santa Barbara
-
5/16/2016 - Terry Swartzell – General Motors Company
-
5/16/2016 - Ali Fallahiarexoodar – The Ohio State University
-
5/16/2016 - Henric Lindberg - Volvo Car Corporation
-
5/16/2016 - Paul Belanger – Gestamp
-
5/16/2016 - Harry Singh – EDAG, Inc.
-
5/16/2016 - Shawn Morgans – Ford Motor Company
-
5/16/2016 - DJ Zhou – FCA US LLC
-
5/16/2016 - Darrell Quander, Jr. – Hyson Metal Forming Solutions
-
5/16/2016 - Jim Evangelista – Shiloh Industries
-
5/16/2016 - Yu-Wei Wang – AK Steel Corporation
-
5/16/2016 - Jason Coryell – General Motors Company
-
5/16/2016 - Jay Finn – LaserCoil Technologies LLC
-
5/16/2016 - Tom Bell – Hitachi Metals America
-
5/16/2016 - Hari Simha – CanmetMATERIALS
-
5/16/2016 - Borek Dvorak and Jad Tawk – Benteler
-
5/16/2016 - Kelvin Shih – Lawrence Technological University and John Pippin, Jr. – Milco Manufacturing Company
-
5/16/2016 - Vaidyanath Rajan – The Lincoln Electric Company
-
5/16/2016 - Curt Horvath – General Motors Company and Eric Batt – ArcelorMittal
-
5/16/2016 - Mark Hineline – AutoForm Engineering USA
-
5/16/2016 - Stephen Kelley and Hassan Ghassemi-Armaki – ArcelorMittal
-
5/16/2016 - Min Kuo – ArcelorMittal
-
5/16/2016 - Rahul Patwa – Fraunhofer USA